Youth rec leagues, travel teams, school programs and adult leagues use our custom DTF transfers for jerseys, warmups, practice shirts and fan gear. Print the team logo once, add every player's name and number, and press them yourself. There is no minimum, so a late sign-up or a replacement jersey is never a problem.

Orders placed by 2 PM EST ship the same business day, and shipping is free on orders over $100.

Shop DTF transfers

Made for Game Day and Long Seasons

Team gear gets stretched, sweated in and washed constantly. A properly pressed DTF transfer stays flexible, moves with the fabric and survives 50 or more washes without cracking. The white underbase keeps team colors accurate on any jersey color.

Most jerseys are polyester, so press them at the lower temperature listed below. That prevents scorching and keeps the jersey dye from bleeding into white numbers.

What Teams Usually Print

  • Jerseys: front logo, back numbers and player names.
  • Warmups and practice shirts: a smaller chest logo.
  • Coaches and staff: polos and quarter-zips with the same logo.
  • Fan and booster gear: parent shirts and fundraiser merch.

Put every player's name and number on one gang sheet and you print a whole roster in one order. Our guide for soccer clubs walks through a full kit.

Three Ways to Order

Order DTF transfers by size when you have one design in one size. Stock sizes run from 2 x 2 to 12 x 16 inches. If you have several designs, names or sizes, the Gang Sheet Builder lets you arrange them on a single 22.5-inch-wide sheet and pay for the sheet rather than each piece. If your layout is already done, upload your own gang sheet as a print-ready file, up to 300 inches long. Not sure what size to pick? The DTF transfer size chart lists recommended widths for every common placement.

How to Press Them

Set your heat press to 315 to 325°F, press for 15 seconds with firm pressure, let the transfer cool and peel the film, then press again for 10 seconds. On polyester performance fabric or anything heat-sensitive, drop to 265 to 280°F for 20 seconds. A household iron can work for a small design in a pinch, but a heat press gives far more consistent results.

Browse all custom DTF transfers or start with DTF transfers by size for a single team logo.

Questions? Talk to our team