FREE Shipping $100+
FREE Shipping $100+ | As Low as $3.00 per sq/ft

Your cart

Your cart is empty

DTF Custom Transfers - Strategies for Success During the Transfer Process

DTF Custom Transfers - Strategies for Success During the Transfer Process

Using heat transfer products is not complicated, but if you don't learn the ropes, you could make mistakes and ruin the transfer. Don't let this happen to you and call foul. Instead, get off the bench and prepare for an assist because you're about to learn how to successfully put your favorite graphics on soft, cotton tees correctly the first time.

The Proper Heat Setting Matters

When it comes to the temperature of a heat press, it should be set to about 385 degrees Fahrenheit. A 385-degree temp will help each design set properly on a fabric. If you set the temperature any higher than this, the heat from the press could damage the material.

Color Tactics

In the world of heat transfers, dark-colored graphic designs are best since they have a longer life span. While light colors will work, always use them with caution because these colors will often fade, chip, and peel faster as they age.

The Tactics for Heat Transfers

First, grab a shirt that you would like to customize and preheat it to remove wrinkles. Next, put the shirt on the press in the correct spot; for the best results, use a ruler or an alignment tool. Finally, center the design on the shirt with a collar aligner tool, and drop the heat press into the shirt.

Score Big and Run a Full-Court Press with Quality DTF Custom Transfers

If you need access to top-of-the-line DFT custom transfers, don't sit on the sidelines. Team up with the squad at Eazy DTF - DFT Transfer; to take your shot, just visit

eazydtf.com

Previous post
Back to Blog